Epoxy Floor Coat SL
Slide

Product Description

Khodal Concrete Primer is a modified two-component solvent-less epoxy resin based primer. The system comprises of an epoxy resin in combination with suitable catalyst. Application of this combined system on the concrete surface provides an excellent adhesion to super-lying structures.
Faux Finishes
Slide

Intended Uses

Khodal Concrete primer is use for flooring, painting on concrete structure and can be recoated with topcoat by using epoxy, polyurethane, chlorinated rubber paints.
Faux Finishes
Slide

Surface Preparation:

Surface should be cleaned and free from oil, grease, and latencies. It should be cleaned with high-pressure jet cleaning with water. Surface should be dried thoroughly before application
Faux Finishes
Slide

Application Method:

Application can be done by brush or Airless spray depends on requirement at recommended dry film thickness of 100 – 150 microns brush application is preferred over spray for better penetration for primer application. The coating is solvent free and therefore no thinner is recommended.
Faux Finishes
Slide

Product Description

Khodal Concrete Primer is a modified two-component solvent-less epoxy resin based primer. The system comprises of an epoxy resin in combination with suitable catalyst. Application of this combined system on the concrete surface provides an excellent adhesion to super-lying structures.
Faux Finishes
Slide

Intended Uses

Khodal Concrete primer is use for flooring, painting on concrete structure and can be recoated with topcoat by using epoxy, polyurethane, chlorinated rubber paints.
Faux Finishes
Slide

Product Information:

Shade : Clear
Volume solids : 99 %
Recommended DFT : 100-150 microns
Mixing Ratio : 2:1/ Volume
Pot Life : 20 to 45 min depending on Temperature
Theriotical covering : 6.6 to 9.9 m/ litre
Shelf Life : At least one year when kept packed in standard warehouse condition
Faux Finishes
Slide

Surface Preparation:

Surface should be cleaned and free from oil, grease, and latencies. It should be cleaned with high-pressure jet cleaning with water. Surface should be dried thoroughly before application
Faux Finishes
Slide

Application Method:

Application can be done by brush or Airless spray depends on requirement at recommended dry film thickness of 100 – 150 microns brush application is preferred over spray for better penetration for primer application. The coating is solvent free and therefore no thinner is recommended.
Faux Finishes
Slide

Pot Life:

Material mixed should be utilised in 30 min
Faux Finishes