Product Description
Khodal Water based Universal Primer is a premium quality water based primer designed to be applied on Masonry, Metal and Wooden surfaces. It is eco-friendly, fast drying, low odour and demonstrates excellent adhesion on galvanized, aluminum and aged alkyd coatings. Can be top-coated with Water Based or Solvent Based Enamels.
Intended Uses
Masonry, primed plaster, concrete, concrete blocks, brickwork, cement render, ceilings, gypsum,wood , metal surfaces etc.
Product Information:
Colour Range : White ( Self Standard )Finish : Smooth & Flat
Volume Solids : 36 ± 2 % ( Typical White )
Sp. Gravity. Kg./Ltr. : 1.44 + 0.05
Theoretical covering : Approx. 240~ 260 Sq.Ft/ Lit/ coat. Practical coverage may vary depending on surface
profile, method of application and losses and substrate type
Recommended DFT per coat : 15-20 Microns, Higer film thickness will deliver enhanced aesthetics
Drying Time (at 25 + 2® C &
RH 60 + 5%) : Surface Dry : 1 Hour maximum
Recoat :4-6 hours
Cooler temperatures, higher film thickness or higher humidity conditions will require longer
drying time
Toxicity : Dry Film is non-toxic and lead free
Flash Point : Not applicable
Packs available : 20 L,10L, 4 L, 1L & 500 ml
Surface Preparation:
MetalScrape and remove all loose/flaking rust. Wipe surface clean prior to application of the first coat of the Primer
Masonry/Concrete
All new surfaces must be cured according to supplier’s recommendations – usually for about 30 days. For old previously painted Surfaces, scrape and sand old or checked paint to a smooth/dull surface using 180 # emery paper. Remove all sanding dust prior to application of the Primer.
Wood
Sand any exposed wood to a fresh surface. Patch all holes and imperfections with a wood filler or putty and sand smooth prior to
application of the primer.
Application Method:
Application Method : Brush/Roller/Spray Use a Nylon/Polyester Brush. Use a quality ¼ – ¾ nap coverThinning Recommended : 50-70 % by volume depending on surface, if required
Thinner/Cleaner : Clean Water
Recoating time between coats : 4-6 hours
Recommended System:
MetalSW Water Based Red Oxide/Universal Primer ( 1Coat ) + KHODAL 501 Water Based Gloss Enamel ( 2-3 coats )
Masonry/Concrete
KHODAL Water Based Universal Primer (1 coat) + KHODAL Interior Putty + KHODAL Water Based Universal Primer + Khodallux Water Based Enamel (2-3 coats)
Wood
System1: KHODAL Water Based Universal Primer (1 Coat) + Khodal Water Based Enamel (2-3 coats)
System2: KHODAL Water Based Enamel (1:1 dilution) + Khodal Water Based Enamel (2-3 coats)
Shipping Information
Freight Classification – Paint
Flammability – Non Flammable
Shelf life
Shelf Life – 24 Months in original sealed containers when stored in convered ventilated areas
Safety & Precautions
• Stir contents thoroughly before thinning. Avoid extra thinning.
• Protect from freezing
• Non-Photochemically reactive
• Do not apply when surface temperature is below 10®C
• Provide adequate ventilation during use
• Check adhesion of old paint before repairing
Avoid exposure of the new paint film to steam for 48 hours and to washing or scrubbing for 7 days
• Keep away from children
Disclaimer:
The information and recommendations set forth in this Product Data Sheet are based upon tests conducted by or on behalf of Khodal Paints. Such information and recommendations set forth herein are subject to change and pertain to the product Offered at the time of publication. Consult your Khodal representative to obtain the most recent Product Data Sheet.
