Water Based Enamel
Slide

Product Description

Khodal Water Based Enamel is a high quality enamel designed to provide service performance equal to high quality alkyd enamels. The product is eco-friendly, Lead free and demonstrates excellent gloss retention properties besides outstanding stain resistance
properties.
Faux Finishes
Slide

Intended Uses:

Masonry, primed plaster and wooden surfaces. Project uses include all trim areas and moulding, cabinets/doors/windows, kitchen/baths/locker rooms, laundry rooms, high traffic areas, For Interior/Exterior use.
Faux Finishes
Slide

Product Information

Colour Range : Brilliant White, Black and most popular colours. To optimise hide and colour development , Always use the recommended P-Shade primer
Finish : Gloss, Satin & lustre
Volume Solids : 35 + 2% (Typical for white)
Sp. Gravity. Kg./Ltr. : 1.20 + 0.03
Gloss on 60® Glosshead : >80 units on glass plate under ambient conditions
Theoretical covering : Approx. 110-140 Sq. Ft./Ltr./2 coats. Practical coverage may vary depending on surface
profile, method of application and losses and substrate type
Recommended DFT per coat : 15-20 Microns, Higer film thickness will deliver enhanced aesthetics
Drying Time (at 25 + 2® C &
RH 60 + 5%) : Surface Dry : 1 Hour maximum
Recoat :4-6 hours
Cooler temperatures, higher film thickness or higher humidity conditions will require longer
drying time
Toxicity : Dry Film is non-toxic and lead free
Flash Point : Not applicable
Faux Finishes
Slide

Surface Preparation:

Masonry/Concrete

All new surfaces must be cured according to supplier’s recommendations – usually for about 30 days. For old previously painted
Surfaces, scrape and sand old or checked paint to a smooth/dull surface using 180 # emery paper. Remove all sanding dust prior to
application of the Primer.

Wood

Sand any exposed wood to a fresh surface. Patch all holes and imperfections with a wood filler or putty and sand smooth prior to
application of the primer.

Faux Finishes
Slide

Application Method

Application Method : Brush/Roller/Spray Use a Nylon/Polyester Brush. Use a quality ¼ – ¾ nap cover
Thinning Recommended : 0-15% by volume depending on surface, if required
Thinner/Cleaner : Clean Water
Recoating time between coats : 4-6 hours
Faux Finishes
Slide

Recommended System:

Masonry/Concrete

SW Water Based Universal Primer (1 coat) + SW Interior Putty + SW Water Based Universal Primer + Aqualux Water Based Enamel
(2-3 coats)

Wood

System1: SW Water Based Universal Primer (1 Coat) + Khodal Water Based Enamel (2-3 coats)
System2: Khodal Water Based Enamel (1:1 dilution) + Khodal Water Based Enamel (2-3 coats)

Shipping Information

Freight Classification – Paint
Flammability – Non Flammable

Faux Finishes

Packaging & Shelf life
Packs available – 500ml, 1 Ltr., 4 Ltr., and 20 Ltr., Shelf Life – 36 Months in original sealed containers when stored in convered ventilated areas

Safety & Precautions
• Stir contents thoroughly before thinning. Avoid extra thinning.
• Protect from freezing
• Non-Photochemically reactive
• Do not apply when surface temperature is below 10®C
• Provide adequate ventilation during use
• Check adhesion of old paint before repairing
Avoid exposure of the new paint film to steam for 48 hours and to washing or scrubbing for 7 days
• Keep away from children

Disclaimer:
The information and recommendations set forth in this Product Data Sheet are based upon tests conducted by or on behalf of Khodal Paints. Such information and recommendations set forth herein are subject to change and pertain to the product Offered at the time of publication. Consult your Khodal representative to obtain the most recent Product Data Sheet.